Used CEV tail light bulb holder.

5mm Dellorto main jets in the 50's range: 50, 52, 54, 56, 58.  For use in all SHA and PHBG carbs

Replacement filter for your 14.9, 14.12, 14.14,15.15 and 16.16 Dellorto SHA. Includes the screen, cap and clip.

Black plastic throttle and matching 7/8 grip from Lusito.

Round black headlight with chrome rim for all mopeds. The socket in this head light uses an 1157 dual filament bulb.

1mm thick reducing shim for dellorto carburetors. Only works with 15.15 and 16.16 carbs.

21mm OD
19mm ID

Authentic Dellorto SHA made in Italy. Awesome upgrade carb for most bikes. Slap this on your motobecane, peugeot, puch, minarelli, garelli, sachs, morini or tomos and forget about it. This is the click choke version.

Black domino style throttle with bonus grip already installed. This is just like the throttles that came stock on lots of Italian mopeds. Super low profile throttle assembly for a nice clean look on your bars.

5mm Dellorto main jets in the 70's range: 70, 72, 74, 76, 78. For use in all SHA and PHBG carbs.

5mm Dellorto main jets in the 80's range: 80, 82, 84, 86, 88. For use in all SHA and PHBG carbs.

Authentic Dellorto SHA made in Italy. Awesome upgrade carb for most bikes. Slap this on your motobecane, peugeot, puch, minarelli, garelli, sachs, morini or tomos and forget about it. This is the click choke version.

Authentic Dellorto SHA made in Italy. Awesome upgrade carb for most bikes. Slap this on your motobecane, peugeot, puch, minarelli, garelli, sachs, morini or tomos and forget about it.

Stock tail light. This came standard on lots of bikes including puch and tomos. Fit this on pretty much any moped ever!

This uses 2x single filament bulbs.

original OEM CEV taillight with licence plate bracket.

very nice cause you can just mount your license plate right to it!

Super nice quality superman shape tail light for letting the folks behind ya know you're there.

Catch all the crud with these internal banjo filters for Dellorto SHA carbs. Fits 14-16mm carbs.

Super heavy duty universal ignition condenser for wiring externally. Get some new connectors if you need them.

Nice chrome gas cap for any tank using 30mm caps.

Folding Pegs for you and a buddy. These mount over the rear shock bolt.

Clear fuel filter for standard 5mm fuel line.

Super awesome 5mm Tygon fuel line for all your fuel flowing needs.

Super awesome 5mm Tygon fuel line for all your fuel flowing needs.

Change your plug on the go with this 3/16" spark plug tool.

Awesome 2 wire on/off ignition switch perfect for mopeds.

ADD TO CART TO CHECK STOCK!
NGK spark plugs. BHS series. Best in the world!

ADD TO CART TO CHECK STOCK!

NGK spark plugs. Resistor type short thread plugs.

NGK spark plug boot LB05FP. This is the resistor type that uses the little cap on the tip of the plug. 90 degree bend for those hard to reach places!

Small fuel filter for all mopeds. Perfect for tight spaces like moby or maxi!

stock black dellorto SHA carburetor forward facing air filter for any bike using an sha prettty much. this one is branded motori minarelli for all your brand enthusiasts out there. and many others of course..

for larger dellorto SHA carburetors 14.12, 15.15, 16.16

includes the plastic air box + clamp but no mesh filter!

04 0843

Awesome upgrade Dellorto SHA carb for most bikes.

Trail Tech A/C Voltage Regulator. Stop blowing out those lights on kitted bikes! -Improved A/C Regulator with Adjustable Output.

Dual filament double contact BAY15D bayonet base bulb for moped tail lights. 13.5 Volt .69 Amp 9.32 Watt.

HPI mini electronic CDI ignition for Garelli NOI. Super bright 60w lights and curved CDI box.

Universal 12mm sealed axle bearing for front wheels. 165m with spacers.

EBC brand #931 90mm x 18mm brake shoes primarily for puch snowflake mags, should also fit some tomos mags and some garelli spoke wheels.

Universal high tension/external ignition coil for any moped you can fit it on. Works great with 6v or 12v points or CDI!

Check the pics for examples of what's included. Each pack is approximately 20 random pieces. Super grab-bag style!

Check the pics for examples of what's included. Each pack is approximately 20 random pieces. Super grab-bag style!

OEM replacement rubber donut clutch for the one speed Garelli NOI engines. Get em before they're gone again.

280mm - 300mm length rear shocks for puch maxi, tomos, minarelli, morini etc.

5mm Dellorto main jets in the 60's range: 60, 62, 64, 66, 68. For use in all SHA and PHBG carbs

5mm Dellorto main jets in the 90's range: 90, 92, 94, 96, 98. For use in all SHA and PHBG carbs.

Airplane red LED toggle switch with a carbon fiber style cover.

ADD TO CART TO CHECK STOCK!

Universal 12mm sealed axle bearing for rear wheels. 190mm long with spacers.

Magura grips. Looks like a waffle. Good for snacking. 7/8" bars. One for throttle side one for left control side.

Dual filament 12 volt 1157 light bulb with BAY15D base. Two filaments. Use for head light with low/hi beam, or tail light/brake light.

Replacement 6v sealed beam head light bulb. Fits in standard moped sized round head lights. 6v 30w.

Replacement 12v sealed beam for moped headlights.

Magura grips. Looks like a waffle. Good for snacking. 7/8" bars. one right grip for the throttle side