Used CEV tail light bulb holder.

Nice budget throttle option for savvy folks looking for the cheap alternative. This includes a grip yay! the throttle/perch and a brake stop knarp for your brake cable.

Stockish looking chrome switch made by Guia. Use it for lights, kill, horn - whatever you want. Mounts to all 7/8" bars.

Black plastic throttle and matching 7/8 grip from Lusito.

Round black headlight with chrome rim for all mopeds. The socket in this head light uses an 1157 dual filament bulb.

Black domino style rear brake lever assembly with bonus grip already installed. Super low profile assembly for a nice clean look on your bars. Spring loaded plastic brake lever, brake lever is about 5.7" long. Use these on any moped - 7/8 or 22mm handlebars.

Stock tail light. This came standard on lots of bikes including puch and tomos. Fit this on pretty much any moped ever!

This uses 2x single filament bulbs.

original OEM CEV taillight with licence plate bracket.

very nice cause you can just mount your license plate right to it!

26mm x 1.5mm and 22 x 1.5mm flywheel puller for tons of Bosch flywheels - Puch, Kreidler, Tomos a3/a35, Batavus m56, Solo and Derbi Motoplat flywheels.

Super nice quality superman shape tail light for letting the folks behind ya know you're there.

Cable stop for magura controls. Sold individually.

mini cable knarp for moped cables. most people use these on their clutch or throttle ends.

measures M4 - 7mm long - 5mm OD

puch magnum style moped pedals!! these are 9/16" thread and will fit most mopeds!

long cable knarp for moped cables. works great for brakes

M6 - 15mm long - 8mm OD - 7mm

Super heavy duty universal ignition condenser for wiring externally. Get some new connectors if you need them.

Folding Pegs for you and a buddy. These mount over the rear shock bolt.

Clear fuel filter for standard 5mm fuel line.

Super awesome 5mm Tygon fuel line for all your fuel flowing needs.

Super awesome 5mm Tygon fuel line for all your fuel flowing needs.

Change your plug on the go with this 3/16" spark plug tool.

Awesome 2 wire on/off ignition switch perfect for mopeds.

ADD TO CART TO CHECK STOCK!
NGK spark plugs. BHS series. Best in the world!

ADD TO CART TO CHECK STOCK!

NGK spark plugs. Resistor type short thread plugs.

NGK spark plug boot LB05FP. This is the resistor type that uses the little cap on the tip of the plug. 90 degree bend for those hard to reach places!

Small fuel filter for all mopeds. Perfect for tight spaces like moby or maxi!

Trail Tech A/C Voltage Regulator. Stop blowing out those lights on kitted bikes! -Improved A/C Regulator with Adjustable Output.

Nice budget rear brake control option for savvy folks looking for the cheap alternative. Has spring loaded brake lever, threaded hole for brake light switch and a non-threaded hole for a mirror.

Grab the lusito throttle control and you'll have a matching set yay!

Dual filament double contact BAY15D bayonet base bulb for moped tail lights. 13.5 Volt .69 Amp 9.32 Watt.

Universal 12mm sealed axle bearing for front wheels. 165m with spacers.

Universal high tension/external ignition coil for any moped you can fit it on. Works great with 6v or 12v points or CDI!

Check the pics for examples of what's included. Each pack is approximately 20 random pieces. Super grab-bag style!

Check the pics for examples of what's included. Each pack is approximately 20 random pieces. Super grab-bag style!

Airplane red LED toggle switch with a carbon fiber style cover.

ADD TO CART TO CHECK STOCK!

Very lightly used Solo engine cases. Go nuts.

Universal 12mm sealed axle bearing for rear wheels. 190mm long with spacers.

Dual filament 12 volt 1157 light bulb with BAY15D base. Two filaments. Use for head light with low/hi beam, or tail light/brake light.

Replacement 6v sealed beam head light bulb. Fits in standard moped sized round head lights. 6v 30w.

Replacement 12v sealed beam for moped headlights.

an awesome private collection of goodies to repair your broken headlight or upgrade your sealed beam headlight to take standard dual filament bulbs! the glass lens/reflector fits most bullet headlights along with most vespa headlight that take sealed beam units.

includes headlight bucket, glass lens/reflector and bulb socket!

this does NOT include the chrome headlight ring or the metal clip that holds the socket in place!

socket accepts BAY15D dual filament bulbs.

inside lip of the glass reflector is 102mm. please verify that this is the same for your headlight before purchasing to be safe!!!

ADD TO CART TO CHECK STOCK!

LED toggle switch. Use it for kill switch or light switch. Pick your color!

Super unique bolt for securing your brake levers to their perches. This is the m5 bolt with the plastic nut.

m5 bolt
m5 plastic nut
23mm overall length
9mm unthreaded part

Return spring for spring loaded magura brake lever controls. This is for the left side lever.

Return spring for spring loaded magura brake lever controls. This is for the right side lever.

Italian Motomarina Sebring style bolt on reflectors. On sebrings these bolt on the fork nuts and hang down the side of the fork.

94 x 29 x 8mm

Also found on Tomos some models. Tomos part number 222424

CEV 218

We have 8.5mm and 9.5mm pins. Double check which size you need and select your size from the drop down.

replacement chrome pedal arms for mopeds. you'll need some cotter pins though.

IF your pedal shaft for some reason doesn't have enough space for these arms then yeah you gotta use another type we sell, and bummer for you. 9/16" pedal thread size 182mm total length 47mm of outward clearance 28mm base uses 9.5mm cotter pins.

replacement short chrome pedal arms for mopeds

replacement short black pedal arms for mopeds

replacement black pedal arms for mopeds