Universal rear axle adjusters for any moped that uses this type of adjusters. Use these to keep your wheel centered and your chains tight! Sold in pairs.

-12mm ID

New brake shoes for your puch spoke wheels and mags, and moby or peugeot spoke wheels. These are for leleu brake plates and measure about 80mm x 18mm.

Measure your current shoes before you buy em!

Black hydraulic Grimeca style brake caliper for front disc brake set-ups. This bolts directly onto non-hydraulic EBR forks. Grab a front hydraulic brake line, some brake fluid and a master cylinder too, if you need em.

-M10 x 1.0 thread pitch banjo bolt
-Bottom mount hole is M8 x 1.25mm
-Thread top mount hole is 8mm
- Mount spacing is 60mm

Brake shoes for Puch "snowflake" Grimeca FRONT mag wheels and some other types of various mags.

Double check the size and that you need the circle end mount type before you get them!

Slick moped tire for 16" wheels.

Rated for speeds not in excess of 93 mph. No problem for most of us.

17 x 2.5 Mitas MC11 slick racing tread moped tire for any 17" rim.

16 x 2.25 Mitas Sava B8 street tread moped tire for any 16" rim.

17 x 2.00 Mitas MC11 slick racing tread moped tire for any 17" rim. These will fit perfecto in your stock Puch Maxi or Newport front fender without rubbing the fender braces!

17 x 2.25 Mitas MC11 slick racing tread moped tire for any 17" rim. These will fit perfecto in your later model Puch Maxi or Newport front fender, the ones with the wide section at the top of the brace.

Brake shoes for rear Puch Grimeca "snowflake" mags, lots of tomos mag wheels, and hobbit mag wheels.

Double check the size and that you need the dual spring type before you get them!

Top of the line quality brake shoe from EBC. This fits most 80mm x 18mm leuleu hubs. Puch, moby, peugeot etc.

Comes with springs!

This is a rubber strip that goes around spoke wheels and protects your tube from any spokes poking through.

We have strips for 16", 17" and 18" wheels.

Super heavy duty moped inner tube made by Sedona. Select your size from the drop down. If you don't see the one you need it means we're out of stock for now.

Lube up the bead of your tires with this pasty creamy cream to make tire installation super easy. This will also help with proper bead seating!

OEM replacement disc brake pads for Tomos revival, Streetmate and Arrow. Double check that these are the pads you need! There's a chance your caliper takes this style brake pad instead.

Honda hobbit, camino, pa50, nu50 bearing for both sides of the crank.

Comes without seal!

SKF, NTN, NACHI, ZKL, or similar name brand only. Never any junky trash bearings.

95mm x 20mm brake shoe set for some tomos mopeds. Double check your size first to be sure.

Go ahead, ask them a question.

Golden bullet valve stem caps for showin em you mean business.

8" Motion Pro tire iron for all your tire iron needs. Sold individually.

ONE 11" motion pro tire irons.

if you would like two, as in the picture, please purchase two. this item is sold individually. in other words a qty of 1 is 1 tire iron. a qty of 2 is 2 tire irons, or effectively a set.

Replacement front brake plate for Bernardi mag wheels. Comes with 90mm x 18mm brake pads installed. 12mm axle hole.

Shinko SR244 super knob. Hit the dirt or ride the street. Dual sport tires for your moped.

OEM Tomos 12mm sealed rear axle.

-185mm long
-34mm of threading
-12mm OD in the center
-11mm threads

Honda Urban Express NU50 brake shoes. Also for Honda Express FRONT brakes.

95mm x 20mm

Throw them on your rims or hang them from your rear-view. High rollers only.

Used 16 inch front mag wheel for Tomos. This has a brand new 16" x 2.5" Sava B8 tire mounted to it. The bearings spin great, so just pop in your axle and brake plate and you're ready to roll.

original OEM brand spanking new tomos REAR black lightning mag wheel. comes with an mc2 16 x 2 1/4, sealed bearings, 22T sprocket, bolts to hold it on and locking sprocket washer

note these have some shelf wear (dust, small scratches, nicks, etc) so be aware of that!

grab a brake plate if ya need one to your liking here!

we aren't sure of the tomos part number yet as the wheel seems to be different front the gold and silver 10 rays which have the according part numbers: 230105, 230123, 230124, 230678

Mitas brand 19 x 2.25 inch moped tire. Use this on lots of French import mopeds or whatever rim that needs a 19 inch tire. Grab a 19 inch tube too, yeah?

Universal 12mm sealed bearing axle with washers, nuts and spacers.

Comes with a whole bunch of spacers to fit this up perfecto:

-(1) 6.5mm spacer
-(1) 7.25mm spacer
-(2) 11.9mm spacer
-(1) 37mm spacer

-165mm long
-25mm of threading on ends

EBC brand #931 90mm x 18mm brake shoes primarily for puch snowflake mags, should also fit some tomos mags and some garelli spoke wheels.

Top of the line Polini brand brake pads for your puch lelue spoke wheels and puch 5 star mags, also for post 1978 motobecane leleu spokes and all peugeot spoke wheels.

Polini part no: 176.1241

EBC brand 95mm x 20mm brake shoes for Honda. This is the rear brake shoe for Honda nu50 Urban Express for sure.

Fits all these Honda models:

14 x 2.5 super knob MX style tire for your qt50 or fa50 - if you can make it fit!

IRC MX GS-45F

10 x 2.5 inch tire from Shiko. It's so cute.

Shinko SR400.

Super skinny tires for your super skinny rim. These are the perfect stock replacement for most Puch maxi's. Any tire wider than 2" is going to scrape against your front fender. So buy these and save yourself the trouble.

112mph speed rating
542mm diameter

EBC brand brake shoes for all Derbi spoke and mag wheels: variant, ds50, c5, diablo, rd50. Not for revolution tho!

Washer tab thing that goes on snowflake sprockets.

Kill all the vampires with these silver bullet valve stem caps.

Throw them on your rims or hang them from your rear-view. Or use them to play c-low at the track.

Throw them on your rims or hang them from your rear-view. High rollers only.

Green glow Streetfx motion activated valve stem caps. These are hex shaped.

Blue glow Streetfx motion activated LED valve stem caps.

Green glow Streetfx motion activated LED valve stem caps.

Roll through hell with these chrome SKULL valve stem caps.

Throw them on your rims or hang them from your rear-view. High rollers only.

Throw them on your rims or hang them from your rear-view. High rollers only.

Blue glow Streetfx motion activated valve stem caps. These are hex shaped.

Multi colored glow Streetfx motion activated valve stem caps. These are hex shaped.