A Bosch brand coil with the numbers 459 and attached ground strap. Double check that this is the one you need! 47mm eye to eye.
A Bosch powered coil for Puch e50s and za50s to run brake lights or horn or a boom box if you're handy. 54mm eye to eye.
Bosch lighting coil marked #247. 46mm bolt holes center to center. 71mm total length. 14mm thick posts.
Original Tomos A55 70A 12V DC four pronged relay. Found on Streetmates, Arrows, and Revivals. Fitment:-2004 - 2012 Tomos Revival -2006 - 2008 Tomos Arrow R -2005 - 2012 Tomos Streetmate and Streetmate R12 volt, 70 amp 30, 85, 86, 87. OEM Tomos part number: 230843.
12 volt 10 watt light coil for adding lights to your Tomos, Puch and Honda HPI Inner rotor ignitions.
Universal high tension/external ignition coil for any moped you can fit it on. Works great with 6v or 12v points or CDI!
Replacement HPI external ignition CDI coil for all the HPI CDI units. You can also use this on any other 6v or 12v cdi unit or points ignition as well. Comes with about a foot and a half of ignition wire.
tomos A55 OEM electronic ignition coil plus cdi box, get the complete package here!!this is generally found on 2003 to current models of tomos but you can use this on pretty much whatever you like. tomos part number - 233729 this is also the replacement for 234256 (discontinued) which is just this box with a wire and spark plug boot! so cool!
ADD TO CART TO CHECK STOCK!
tomos A35 OEM electronic ignition coil plus cdi box, get the complete package here!!this cdi box is found on 2003 and earlier tomos bikes generally, most a35 will have this ignition if you have CDI. perfecto upgrade for many bikes of course, the stator mounts are the same for tomos, puch, some sachs, some batavus, etc. tomos part number - 230627
OEM Tomos starter motor made for A55 engines.
Replacement HPI mini rotor flywheel for Puch, sachs, derbi and tomos HPI mini rotor ignitions.
New old stock Jawa 210 coil. Or moped parts galaga. Yeah, moped parts galaga. Mounting holes are 30mm center to center.
New old stock Jawa 210 stator plate with built in coil and wire. Not an HPI bruh. OEM part number: 210.61.004
3 prong universal moped 12v flasher relay for making lights flash on your moped. Hook it up to your head light just for fun maybe.
OEM puch e-50 coil mount....for umm...mounting a coil to your e-50.
Upgrade your dim 6 volt lights to 12 volts!
A Bosch brand coil with the numbers 164. It looks like it goes to a Tomos stator but double check that this is the one you need! 47mm eye to eye!
A Bosch brand coil with the numbers 379. Double check that this is the one you need! 47mm eye to eye
A Bosch brand coil with the numbers 461. Double check that this is the one you need! 47mm eye to eye.
A Bosch power coil for Puch e50s and za50s to run brake lights or horn or a boom box if your handy. 54mm eye to eye.
A Bosch lighting coil for Puch e50s and za50s, Style 2. Some of these have a yellow wire attached. 54mm eye to eye. 11mm tall.
This is a coil for some Sachs Motoplat ignitions, maybe other bikes too! 47mm eye to eye.
This is a lighting coil for some Sachs Motoplat stators, maybe other bikes too! 47mm eye to eye.
A Bosch lighting coil for Puch e50s and za50s, Style 3. Some of these have a yellow wire attached. 54mm eye to eye. 22mm tall.
OEM and NOS red Motoplat igniton coil for Sachs 505 ignitions. 5mm spark wire.
Replacement coil for peugeot 5 coil stators. This is the 21w1 coil.
Replacement coil for peugeot 5 coil stators. This is the 21w2 coil.
Internal coil for Peugeot mopeds. Mounting holes are 55mm apart.
External Peugeot coil with white wire. Mounting holes are 67mm apart. This is essentially a resistor coil - the one that is mounted under the rear rack, just above the taillight for the 2-coil Peugeot ignitions.
Square coil for peugeot 5 coil points stators.
Batavus OEM 10w Bosch light coil. OEM part number 481854.