Used peugeot pulley with pedal/drive function and an 11T sprocket.

Used internal driving gear for Tomos a35 and a55 engines.

Rear sprocket for Tomos a35 and a55 with 22 teeth.

Rear sprocket for Tomos a35 and a55 with 22 teeth. The ID on this is 42.5mm.

Used v1 internal main drive gear. Angled gears for use with angled gear clutch bells. Be sure to get a crown nut for this if you need it.

This is a must have if you're running a Doppler ER variator. This replaces and upgrades your original pulley and adds clutch function to your ER variator.

Universal red drive chain tension roller. Super useful for bikes with stretched swingarms.

SPECS:
-34mm length
-36mm diameter
-22.5mm diameter of the middle part
-6900zz bearings with a 10mm ID

Used puch za50 main shaft gear with 64 teeth on the big gear and 14 teeth on the small gear. This came on the faster 1.5 horse power and 2 horse power engines. So if you have the 66 tooth version switch to this to cram more horses in your engine!

Big 21 tooth front sprocket for going fast fast fast on a Derbi Piston Port engine

36 tooth rear sprocket for Derbi wheels. Use with a 415 or 420 chain.

original OEM tomos 26T front bell sprocket for the fat tire funtastics n arrows of the world + revival!

offset by 17mm

tomos part number 230788

OEM tomos kick start pedal shaft for kick start tomos mopeds post 1992

this is the NON oil pump version

only has ONE cut-out for the cotter pin to fit the kick start lever on!

205mm long

match yours up and it just may be the one youre looking for!!

tomos part number 223447

Used main drive gear for puch e50 engines. This is the regular cut main shaft.

Used main drive gear for puch e50 engines. This is for the counter cut puch clutch bell.

OEM Tomos front sprocket with 27 teeth for a3, a35 and a55.

Used internal driving gear for Tomos a35 and a55 engines.

OEM 18 tooth freewheel for kinetic and vespa rear wheels. This is a regular clockwise thread french threaded freewheel.

OEM 19 tooth freewheel for kinetic and vespa rear wheels. This is a regular clockwise thread french threaded freewheel.

Flywheel nut for kinetic and vespa freewheels.

Use this replacement HFL3030 one way needle bearing to get rid of that wobble in your MBK and Peugeot Doppler clutch pulley.

Puch front sprockets, select your size from the drop-down.

Rear sprockets for lelue hubs and most puch mag wheels. These fit most five stars and leleu spokes but make sure to check the bolt pattern and ID before you buy.

Rear sprockets for puch snowflake grimeca mag wheel hubs. Be sure to check the bolt pattern and ID before you buy.

Rear sprocket for Tomos a35 and a55 with 26 teeth.

New old stock Jawa 207 35 tooth rear sprocket.

OEM part number: 207.4091

New old stock Jawa 210 cone worm gear thing. Czech tech!

New old stock drive sprocket shaft for jawa 207.

OEM part number: 28.2214

New old stock driving gear for jawa 210.

OEM part number: 224.22.001

New old stock driven gear for jawa 210.

OEM part number: 224.22.002

New old stock 13 tooth front sprocket for jawa 210.

OEM part number: 210.17.008

New old stock 13 tooth front sprocket for jawa 207.

OEM part number: 207.27.306

New old stock 14 tooth front sprocket for jawa 207.

OEM part number: 207.27.302

New old stock counter gear shaft for minarelli p4 engines.

OEM part number: 2120-1026

You can refer to this minarelli p4 shop manual for oem part numbers and diagrams.

New old stock gear ratchet for minarelli p4 engines.

OEM part number: 2110-1102

You can refer to this minarelli p4 shop manual for oem part numbers and diagrams.

Used counter shaft with four gears and a bearing. All the gears are in great shape but you'll probably want to replace the bearing.

You can refer to this minarelli p4 shop manual for oem part numbers and diagrams.

Used shift drum for minarelli p4 engines.

OEM part number: 2120-1033

You can refer to this minarelli p4 shop manual for oem part numbers and diagrams.

New old stock shift fork half for minarelli p4 engines.

OEM part number: 2110-1107

You can refer to this minarelli p4 shop manual for oem part numbers and diagrams.

New old stock shifter fork for minarelli p4 engines.

OEM part number: 2120-1031

You can refer to this minarelli p4 shop manual for oem part numbers and diagrams.

New old stock shifter shaft for minarelli p4 engines.

OEM part number: 2110-1112

You can refer to this minarelli p4 shop manual for oem part numbers and diagrams.

Use this to replace your broken engagement lever on stock motobecane pulleys.

11 tooth front sprocket for motobecane pulleys.

13 tooth front sprocket for motobecane pulleys. You may have to modify the teeth on your sprocket lock as this sprocket may be too big. So keep that in mind.

Ratcheting gear for both pedal and kickstart Tomos engines.

Actuator gear for Carabela and Minarelli v1 engines. We have the spring/clips that go with them as well.

One of the gears you need for Carabela and Minarelli kickstart engines.

One of the gears necessary for your carabela or minarelli kickstart engine. One litte gear riding on the back of a bigger gear.

NOS pedal shaft for carabela and minarelli v1 motors. Made in Mexicooo.

Clip collar claw thing for minarelli and carabela pedal actuator gears.

10 toothed minarelli v1 and carabela front sprocket.

11 toothed minarelli v1 and carabela front sprocket.